Avaire Forum  

Go Back   Avaire Forum > Public Information > Cutting Tile > angle grinder bid/ diamond bit

Thread: angle grinder bid/ diamond bit Reply to Thread
Your Username: Click here to log in
Image Verification
Title:
  
Message:
Post Icons
You may choose an icon for your message from the following list:
 

Additional Options
Miscellaneous Options

Topic Review (Newest First)
06-24-2009 10:37 AM
Avaire Archive Author: Journeyman
Date: 2/21/2009 4:56 pm EDT
Don't waste your money buying a RotoZip. Rent a real tile wetsaw. The RotoZip will work on a limited basis but is much too light duty to last and won't cut straight lines without a straight guide of some description.

The 4" angle grinder will work but there again - too many cuts using a dry diamond blade will ruin the blade and progress will be very slow. Rent a wet saw.
06-24-2009 10:36 AM
Avaire Archive Author: Chris
Date: 2/17/2009 4:06 pm EDT
If you only have a few straight cutd then an agle grinder would work because the cut edge wouls be covered by base or quarter round. Most likely you have many straight cut then a wet saw will best your best option.
06-24-2009 10:36 AM
Avaire Archive Author: connie cronbaugh
Date: 2/17/2009 11:17 am EDT
so chris angle roto zip with dry diamond blade will it cut straight cuts or do i need wet saw. if it does cut straigt cutdoes it need guide. thanks
06-24-2009 10:36 AM
Avaire Archive Author: Chris
Date: 2/16/2009 1:12 pm EDT
Avaire tile is cut with the same tools traditional tile is cut with. An angle grinder with a diamond blade designed to cut porcelain tile or the Roto zip both work great for cutting Avaire tile and both will cut the tray with no problem. To make straight cuts you can either rent a wet saw or use a tile cutter and after snapping the tile gently fold back the tile exposing the plastic tray and carefully use a utility knife and score the tray a few times and continue to fold it back untill the tray snaps.
Hope this help. Let me know how it goes.
06-24-2009 10:35 AM
Avaire Archive Author: connie cronbaugh
Date: 2/14/2009 2:51 pm EDT
will either one cut through plastic or will it melt
06-24-2009 10:35 AM
Avaire Archive Author: connie cronbaugh
Date: 2/14/2009 2:31 pm EDT
went on line to check on rotozip bit so what im gathering it cuts around things and create a bigger hole. could you use it with straight edge attachment to cut all straight cuts? also checked out 3 inch blade dry diamond says it needs to go with angle attachment does this attachment have straight edge attachment to cut straigt cut ?
06-24-2009 10:34 AM
Avaire Archive
angle grinder bid/ diamond bit

Author: connie cronbaugh
Date: 2/13/2009 5:13 pm EDT
purchased snap tile however when i went to get something to cut tile and i dont want wet saw i had seen about diamond bit but not sure how cuts straight line and it takes off some since it cuts 1/4 inch saw about angle grinder with diamond blade is that morter or what. i saw kit of roto zip has lots of items inside like sawcover and blade to cut woodwork to slice tile under think i would use all if this works out want to do bedroom and lr and dr one of the blades said dry diamond blade to attach to rotozip. how do cut straight line or can you use this type to cut tile

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


All times are GMT -5. The time now is 01:58 AM.


Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.

(888) 528-2473 Copyright © 2009 : CoMc, LLC All Rights Reserved. ~ Design by Chip Thompson