Avaire Forum

Avaire Forum (http://www.avairefloors.com/forum/index.php)
-   Cutting Tile (http://www.avairefloors.com/forum/forumdisplay.php?f=29)
-   -   cutting avaire tiles (http://www.avairefloors.com/forum/showthread.php?t=100)

Avaire Archive 06-22-2009 07:10 PM

cutting avaire tiles
 
Author: Leah
Date: 4/16/2008 11:38 am EDT
What is the easiest way to cut theses tiles? I have been using a wet saw as recommended but it is not cutting the plastic , I have to use two saws one for the ceramic and one for the plastic. Is there an easier way?

Avaire Archive 06-22-2009 07:11 PM

Author: Chris
Date: 4/16/2008 4:34 pm EDT
Tile saws made by Dewalt,Felker,MK,Target,QEP,Ridgid and others had performed fantastic for cutting Avaire tile. Any of these saws with a blade designed to cut porcelain tile will cut Avaire tile in a single pass without the need to cut the tray seperatly.
Most saws have a depth adjustment, check to see if the blade is adjusted down far enough to cut completly through the tile and tray.
If you are still having problems let us know what type of saw you're using and we may be able to offer suggestions.

Avaire Archive 06-22-2009 07:12 PM

Author: Larry
Date: 4/22/2008 2:32 pm EDT
I purchased a cheap ($70) PowerMaster Pus wet saw with diamond blade from Menards and it works great. It cuts through the tile and plastic in one pass.

Avaire Archive 06-22-2009 07:12 PM

Author: Journeyman
Date: 4/23/2008 7:36 pm EDT
I would suggest buying a better blade. You can't expect much from the blades that come with some of those inexpensive saws.


All times are GMT -5. The time now is 04:56 AM.

Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.