 |
|
|
|
#1
06-24-2009, 09:20 AM
|
|||
|
|||
Cutting holes
Author: Jim Kennedy
Date: 11/11/2008 1:49 pm EDT Can small holes (half in water pipe & toilet flange screw holes) be cut with a dremmel bit?? 
|
|
#2
06-24-2009, 09:21 AM
|
|||
|
|||
|
Author: Journeyman
Date: 11/11/2008 5:06 pm EDT Probably not. Avaire tile is a quality porcelain tile that may require a very aggressive type bit. You may however be able to cut the necessary clearance with a diamond blade wet saw.  You don't necessarily need a nice round hole in most cases. A "V" groove may work as well.
|
|
#3
06-24-2009, 09:21 AM
|
|||
|
|||
|
Author: Chris
Date: 11/11/2008 4:53 pm EDT Journeyman is correct. I haven't had very much luck using a Dremmel tool to cut Avaire tile. An angle grinder with a diamond blade designed to cut porcelain tile dry will work better and most likely cost less money.
|
|
#4
06-24-2009, 09:22 AM
|
|||
|
|||
|
Author: Dave
Date: 11/12/2008 8:06 am EDT I used a rotozip with a PORCELAIN tile bit worked very well. The bit is kind of expensive approx. $40.00. I cut holes in 5 tile had no problem
|
 |
«
Previous Thread
|
Next Thread
»
| Thread Tools | Search this Thread |
| Display Modes | |
Hybrid Mode
|
|
All times are GMT -5. The time now is 05:12 AM.
